en English
en English

only the synthetic ice


a case for premium synthetic ice

material overview

  • Sinter Pressed Very high molecular weight polyethylene (VHMWPe) 
  • Virgin Resin of fine powder consistency sourced through reputable supply partners.
  • The production process complies with the new directive for Good Manufacturing Practice 2023/2006/EC  to ensure a high standard of production quality and documentation.
  • Complies also with the Code of Federal Regulations, Title 21, § 177.1520 “Olefin polymers” – Food and Drug Administration (FDA).
  • All components are thoroughly mixed together before being pressed under controlled conditions under pressure with heating and cooling applied according to exact specifications.
  • Machining is done using state of the art precise computer numerical control (CNC) devices 
  • Machining is done at precise controlled temperatures
  • Quality systems and procedures such as ISO-9001 ensure repeatable procedures and product output time and time again.
shore d hardness
notched impact strength
abrasion index %
Stabilised against ultra violet degradation
Warranted 72 months at 8 hours per day

Did you know? At life end the panels may be ground up and re-cycled and made into other products.

our synthetic ice

panel options

residential synthetic ice
commercial synthetic ice


Premium Glide Infused Material

Full Panels:
1,020mm x 1,020mm, Maximum Weight 7.68kgs
Half Panels:
520mm x 1,020mm, Maximum Weight 3.84kgs


All Purpose Panels

Full Panels:
1,020mm x 1,020mm Maximum Weight 7.68kgs
Terms to Understand:
Average Molecular Weight indicates a fine balance between abrasion resistance and hardness. Soft means the skate digs in; hard means the skate doesn’t hold an “edge”.
Notched impact strength of the material is of paramount importance in supporting the integrity of any panel connecting system.
Abrasion resistance of the material is fundamental to the longevity of glide ability in constant use.
Ultra violet stability is of the essence to appearance and performance in open air locations.

Strength and design of any panel connecting system, must be a major consideration in risk assessments. Forces due to expansion and contraction or panels and panel joint needs to be considered when selecting your products.

Talk to us about the differences in these connection systems and under what conditions you would use each.

full panel

center dot

half panels

dove tail

female ridge

machined ridge

synthetic ice rink

barrier systems

We offer multiple types of barriers based on:

  • application / use
  • climate
  • indoor / outdoor
  • location
  • budget

We can also work with your supplier if you already have one.

Custom Factory Barriers:

Excellent for shopping malls, or any type of recreational skating activity. These barriers can be free standing so no anchors are required into the floor. Contact us for prices!



molded plastic barriers
Snohomish, Washington
backyard synthetic ice rink

Talk to us about your particular needs and we will advise you on what barrier system will work best with our synthetic ice products.

Noiceone Barriers
Yangcheng China Shopping Mall

Molded Plastic Barriers:

This product is excellent for community based skating activities which are permanent or seasonal in nature. The sections are easily assembled or taken apart. Upper netting or even acylic or glass can be added as options.




years (indoors)


years (outdoors)

synthetic ice


The following applies to ICE-Y-BLUE 700™ brand products.

  • Standard floor panels
  • Standard “H” tongue connectors
  • Ultimate barriers (excluding kickers).
  • Standard benches
  • Standard storage racks
Continuous use temperature range  of -50°C to +80°C.  In practice health and safety limitations for human beings will apply. Suggested operational temperature range being –10°C to +30°C.
Delivery, installation supervision and initial staff training will be completed within 8 weeks from receipt of order / negotiated contract (provided of course that the site is ready to accept the NOICEONE rink). Most items are carried in stock at all times.

Continuous use temperature ranges

rubber matting
-50°C to +80°C
cleaning machine
-10°C to +40°C
skate sharpener
-2°C to +40°C
glide spray unit
-10°C to +80°C
-10°C to +80°C
disabled skate chair
-50°C to +80°C
light/sound poles
-10°C to +80°C
glide liquid
-10°C to +40°C
0°C to +40°C
grinding wheels
-2°C to +40°C
diamond dressers
-2°C to +40°C
disinfectant canisters
-2°C to +40°C

Suitable Location Surfaces

Surfaces should be level, smooth, firm, and flat. The substrata should be constructed using wood, asphalt, concrete, and tiles or paving flags.  However, the ICE-Y-BLUE 700™ panel connecting system (Commercial H/Duty) will cope with Gentle slopes and unevenness and can be laid onto grass, aggregate, rolled sand, or compacted earth.

suitability for the disabled

  • Most wheelchairs may be operated on the NOICEONE rink surface.
  • Disabled hockey players have used NOICEONE surfaces with their “sleds”.
  • NOICEONE disabled chairs were the first to be introduced for use on synthetic ice surfaces 

synthetic ice rink


Manufactured by NOICEONE

  • Skate racks.
  • Bench seats.
  • Disabled chair.

Bought-in items

  • Visqueen underlay membrane for skating floor.
  • Rubber matting complete with black “gaffer” tape.
  • Cleaning machine.
  • Glycol spray unit.
  • Skate sharpening machine.
  • Light / sound poles.
  • Skates.

Consumable items to cover initial supply

  • Glycol liquid (if required).
  • Detergent (low foaming).
  • Grinding wheels for skate sharpening machine
  • Diamond dressers for grinding wheels
  • Disinfectant / deodorising canisters for skates boots.
give us a call:
send us an email:
contact us
let us help!

Contact us to get expert advice on your rink project, product recommendations or general questions.

leave us a message below